Loading
MAC AFRIC 0.37 KW Peripheral Vane Water Pump with Flow Control Switch
In stock
SKU
HPUMPP008
R 1,495.00

MAC AFRIC 0.37 KW Peripheral Vane Water Pump with Flow Control Switch

In stock
SKU
HPUMPP008
R 1,495.00
Check Store Availability
MAC AFRIC 0.37 KW Peripheral Vane Water Pump with Flow Control Switch
In stock
SKU
HPUMPP008

Find a Store

A peripheral vane pump, also known as a regenerative turbine pump, uses a peripheral impeller that rotates within a concentric casing channel. As liquid moves from the impeller’s centre to its rim, energy is transferred, allowing for effective fluid movement. The design enables liquid to recirculate between the impeller vanes, enhancing pressure. These pumps are ideal for low-flow, high-head applications, with input power decreasing as the flow rate increases.

 
 
 
 

What is a Peripheral Pump?

A close-coupled centrifugal pump known as a peripheral pump features an impeller with several radial vanes on the exterior edge. Large amounts of energy are transferred while the impeller rotates inside the casing's concentric channel while liquid flows between the vanes and casing, increasing the pressure inside the pump. Fluid flows from the casing's input to its outlet when the pressure inside it rises.

Common Applications

  • To pump uncontaminated liquids
  • Pressure boosting only if the main line pressure is lower than the pump-rated pressure
  • Applications in which a low flow rate must be pumped at high pressure

Technical Specifications

FeatureSpecification
Power Supply230 V ±10% @ 50 Hz (Single Phase)
Motor Output0.37 kW (0.5 HP)
Load Speed2,850 RPM
Flow Rate40 L/PM
Max Pressure10 Bar (146 PSI)
Gauge Increments0.2 Bar
Pump Height0–33 H/M
Amperage2.6 A
Max. Liquid Temperature+90°C
Protection DegreeIP44
Gauge MeasurementBar
Max Ambient Temperature+40°C
Starting Pressure Range4–8 Bar (58–117 PSI)
Write Your Own Review
You're reviewing:MAC AFRIC 0.37 KW Peripheral Vane Water Pump with Flow Control Switch
Your Rating
More Information
Specifications Description

WHAT IS A PERIPHERAL PUMP?

A close-coupled centrifugal pump known as a peripheral pump features an impeller with several radial vanes on the exterior edge. Large amounts of energy are transferred while the impeller rotates inside the casing's concentric channel while liquid flows between the vanes and casing, increasing the pressure inside the pump. Fluid flows from the casing's input to its outlet when the pressure inside it rises.

Peripheral pumps can be used in the following applications:

To pump uncontaminated liquids

Pressure boosting only if the main line pressure is lower than the pump-rated pressure

Applications in which a low flow rate must be pumped at high pressure.


Specifications:

Power Supply: (Single Phase) 230 V ±10% @ 50 Hz
Motor Output: 0.37 kW (0.5 HP)
Load Speed: 2,850 RPM
Flow Rate: 40 L/PM
Max Pressure: 10 Bar (146 PSI)
Gauge Increments: 0.2 Bar
Pump Height: 0–33 H/M
Amperage: 2.6 A
Max. Liquid Temperature: +90°C
Protection Degree: IP44
Gauge Measurement: Bar
Pump Amperage: 2.6 A
Max Ambient Temperature: +40°C
Starting Pressure Range: 4–8 Bar (58–117 PSI)
Power Output: 0.37 kW (0.5 HP)

Package Weight (kg) 4.760000
Package Length (cm) 28.40
Package Width (cm) 17.00
Package Height (cm) 14.20