We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.
Mac Afric Laser Welding Machine, 2000W Air Cooled
The Mac Afric Hand-Held Laser Welding Machine, 2000W Air Cooled, delivers high-precision welding with a fiber length of 10M and a speed of up to 120mm/s. Ideal for industrial applications requiring strong, clean welds.
Laser Welding Machine Specifications
| Feature | Specification |
|---|---|
| Laser Power | 2000 W+ |
| Laser Wavelength | 1080 ± 10 nm |
| Fiber Length | 10 m |
| Operate Mode | Continuous / Modulation |
| Welding Speed | 0 – 120 mm/s |
| Cooling System | Industrial Constant Temp Tank |
| Working Environment Temp Range | 10°C to 40°C |
| Working Environment Humidity | Up to 70% (no condensation) |
| Welding Thickness | 0.5 – 8 mm |
| Welding Gap Requirements | 0.5 mm |
| Working Voltage | 220 V 50 Hz |
Performance & Features
| Feature | Details |
|---|---|
| Operation Modes | Supports both continuous wave and modulated operation. |
| Welding Speed & Efficiency | Up to 35% electro‑optical efficiency; speeds 3–5× faster than traditional methods—higher productivity, lower cost per piece. |
| Shielding Gas | Pure nitrogen or pure argon. |
| Weld Joint Types | Butt, lap, corner welding. |
| Duty Cycle | Continuous 24‑hour operation supported. |
Operational & Safety Considerations
| Aspect | Details |
|---|---|
| Built‑in Safety | Safety ground clamp required—laser emits only when clamp is attached and gun trigger is pressed. |
Durability & Maintenance
| Component | Replacement Interval |
|---|---|
| Protective Lens | Replace monthly, depending on usage. |
| Copper Welding Nozzle | Replace every 3–5 months, depending on use. |
FAQs
1. What type of laser source does it use?
It uses a continuous fiber laser, which offers higher electro-optical conversion efficiency, lower power consumption, and better beam quality than traditional lasers.
2. What is the beam wavelength?
Wavelength: 1080 ± 5 nm
3. What materials can it weld?
Carbon steel, stainless steel, aluminum, and galvanized steel.
4. What is the maximum welding thickness for different materials?
1500 W: 4 mm for carbon steel and stainless steel, 3 mm for aluminum
2000 W: 5.5 mm for carbon steel and stainless steel, 4 mm for aluminum
5. Does it support continuous wave or pulsed operation?
It supports both continuous and modulated operation modes.
6. What is the welding speed and efficiency compared to traditional methods?
Electro-optical conversion efficiency is up to 35%, with energy savings and welding speeds 3–5 times faster than traditional methods.
7. What shielding gases are required?
Pure nitrogen or pure argon.
8. What types of weld joints can it handle?
Butt welding, lap welding, and corner welding.
9. What is the duty cycle at full power?
It supports continuous 24-hour welding operations.
10. Does it come with built-in safety features?
Yes, it includes a safety ground clamp. The laser will only emit when the clamp is connected to the workpiece and the welding gun is in contact with it while the trigger is pressed.
11. How often does it require maintenance or part replacements?
The protective lens may need to be replaced monthly depending on use. The copper welding nozzle usually needs replacing every 3 to 5 months.
Write Your Own Review
| Package Length (cm) | 980 |
|---|---|
| Package Width (cm) | 610 |
| Package Height (cm) | 990 |
| Package Weight (kg) | 105.000000 |