The compact MAC AFRIC compressor is a reliable and portable choice for DIY and trade use. Ideal for inflating, air blowing, nail guns and touch-up spray painting, it’s perfect for the home, garage or workshop. A versatile all-rounder for everyday tasks.
| Feature | Specification |
|---|---|
| Tank Capacity | 24 L |
| Motor Output | 1.5 KW (2 HP) |
| Outlet Air Flow | 3.88 CFM (109 L/MIN) |
| Max Tank Pressure | 8 BAR (116 PSI) |
| Amperage | 13 A |
| Compressor Type | Direct Drive |
| RPM | 2 850 RPM |
| Replacement Head | COMPRH000 |
| Fuel Type | NA |
| Voltage | 230 V @ 50 HZ |
| Problem | Possible Cause | Solution |
|---|---|---|
| Compressor won’t start | Power not connected / faulty plug | Check plug, cable, and socket; ensure correct voltage |
| Motor hums but won’t run | Low voltage / jammed pump | Check power supply, inspect for debris in pump |
| Pressure builds too slowly | Air leaks / worn piston rings | Check hose and fittings for leaks, replace rings if worn |
| Excessive noise | Loose bolts / worn bearings | Tighten bolts, replace bearings if needed |
| Overheating | Poor ventilation / continuous use | Improve airflow around compressor, allow cooling breaks |
This depends on your tools. For light duty use like inflating tires or powering a brad nailer, a small compressor is sufficient. For more demanding tools like impact wrenches or spray guns, look for higher CFM ratings.
Daily after each use, to prevent water buildup and rust in the tank.
Use compressor-grade oil (non-detergent). Check the manual for the specific grade required.
It's best avoided. If necessary, use a heavy-duty, short extension cord rated for the current draw of your compressor.
This depends on tool demand and hose length. Generally, a 3/8" hose is good for most workshop use.
| Manuals & Videos | |
|---|---|
| Package Length (cm) | 63.00 |
| Package Width (cm) | 28.00 |
| Package Height (cm) | 59.00 |
| Package Weight (kg) | 26.000000 |
