Loading
MAC AFRIC 0.75 KW Single Stage Water Pump with Flow Control Switch
Out of stock
SKU
HPUMPP009
R 2,295.00

MAC AFRIC 0.75 KW Single Stage Water Pump with Flow Control Switch

Out of stock
SKU
HPUMPP009
R 2,295.00
Check Store Availability
MAC AFRIC 0.75 KW Single Stage Water Pump with Flow Control Switch
Out of stock
SKU
HPUMPP009

Find a Store

The MAC AFRIC single impeller centrifugal pump is ideal for domestic, agricultural, and industrial use, supplying water through small to medium-sized tanks. It’s commonly used for household pressure boosting and sprinkler irrigation systems. The 0.75 kW model is well suited for homes with two to three bathrooms. Supplied with a flow control switch, the pump automatically activates when taps are opened and shuts off when flow stops. Operating limits include a suction lift of up to 7 m (with foot valve), maximum pressure of 3.5 bar, maximum ambient temperature of 40°C, and liquid temperature up to 90°C.

Technical Specifications

FeatureSpecification
Power Supply(Single Phase) 230 V ±10% @ 50 HZ
Power Output0.75 KW (1 HP)
Max. Rated CurrentNA
Starting Pressure Range3.5 Bar (51 PSI)
Pump Amperage4.9 A
Max Pressure10 Bar (146 PSI)
Load-Speed2 850 RPM
Flow Rate120 L/PM
Pump Height13–33 H/M
Protection DegreeIP44
Max. Fluid Temperature+90° C
Max. Ambient Temperature+40° C
Gauge MeasurementBar
Gauge Increments0.2 Bar
Write Your Own Review
You're reviewing:MAC AFRIC 0.75 KW Single Stage Water Pump with Flow Control Switch
Your Rating
More Information
Specifications Description

WHAT IS A PERIPHERAL PUMP?

A close-coupled centrifugal pump known as a peripheral pump features an impeller with several radial vanes on the exterior edge. Large amounts of energy are transferred while the impeller rotates inside the casing's concentric channel while liquid flows between the vanes and casing, increasing the pressure inside the pump. Fluid flows from the casing's input to its outlet when the pressure inside it rises.

Peripheral pumps can be used in the following applications:

To pump uncontaminated liquids

Pressure boosting only if the main line pressure is lower than the pump-rated pressure

Applications in which a low flow rate must be pumped at high pressure.


Specifications:

Power Supply: (Single Phase) 230 V ±10% @ 50 Hz
Motor Output: 0.75 kW (1 HP)
Load Speed: 2,850 RPM
Flow Rate: 120 L/PM
Max Pressure: 10 Bar (146 PSI)
Gauge Increments: 0.2 Bar
Pump Height: 13–33 H/M
Amperage: 4.9 A
Max. Liquid Temperature: +90°C
Protection Degree: IP44
Gauge Measurement: Bar
Pump Amperage: 4.9 A
Max Ambient Temperature: +40°C
Starting Pressure Range: 3.5 Bar (51 PSI)
Power Output: 0.75 kW (1 HP)

Package Weight (kg) 15.850000
Package Length (cm) 36.07
Package Width (cm) 21.84
Package Height (cm) 38.35